ANGLE – FLAT BAR – U SECTION – MARKING – PUNCHING – SHEARING

Geka Gamma Roller

Gamma Roller, CNC punching machine, was created for the punching, marking and shearing of work involving angles. This CNC-controlled punching machine can be used for angle bar from small, medium and large profiles.

More Information

GAMMA ROLLER 150/160 - 3P

GEKA GAMMA ROLLER 150-2P (DPS)

Model GAMMA ROLLER 65 GAMMA ROLLER 80 GAMMA ROLLER 150 2P GAMMA ROLLER 150 3P GAMMA ROLLER 160
Minimum L 40x40x4 mm 40x40x4 mm 35x35x4 mm 35x35x4 mm 35x35x4 mm
Maximum L 65x65x7 mm 80x80x8 mm 150x150x15 mm 150x150x15 mm 160x160x16 mm
Minimum Flat Bar - - - 50x5 mm 50x5 mm
Maximum Flar Bar - - - 150x15 mm 160x16 mm
Minimum U - - - 60x30 mm 60x30 mm
Maximum U - - - 120x60 mm 120x60 mm
Marking - - Disc Cassette Cassette
Characters - - 40 5x10 size typeface 5x10 size typeface
Nº Punches 2 (1/wing) 2 (1/wing) 4 (2/wing) 6 (3/wing) 6 (3/wing)
Maximum Diameter 18 mm 25 mm 31 mm 31 mm 31 mm
Punching Force 170 kn 340 kn 600 kn 730 kn 730 kn
Shear station tonnage 350 kn 650 kn 1900 kn 1900 kn 2500 kn
Feeder Speed Programmable up to 36 m/min. Programmable up to 36 m/min Programmable up to 36 m/min. Programmable up to 36 m/min. Programmable up to 36 m/min.

Capacities based on material resistance of 65,000 Tensile

 

INPUT CONVEYOR UNIT

  • Servo motor-driven tracking roller
  • Independent encoder
  • Feeder tracks at each end of the line

 

 

 

 

 

PUNCHING UNIT

  • Three different punches per wing (150/160 – 3P Model)
  • Diameters up to 1 1/4″
  • Hydraulic hold down
  • CNC-controlled gauge

 

 

 

 

 

MARKING UNIT (150/160 – 3P Model)

  • Five references
  • Ten characters per reference [3/8 x 1/4″]
  • PC-controlled selection by reference

 

 

 

 

 

 

SHEARING UNIT

  • Clean cuts without waste
  • Easy and quick access to blades

 

 

 

 

USER-INTERFACE

  • Windows-based PC
  • Network connectivity
  • USB ports
  • Graphic interfaces
  • Remote assistance via the internet

 

 

AUTOMATED FEEDER

  • Handles steel profiles up to 40′ in length
  • CNC-controlled

 

 

 

 

 

 

ZERO WASTE UNIT

  • Waste material optimization device
  • Automatically activated
  • CNC-controlled
  • Material optimization calculator

 

 

 

 

OUTPUT CONVEYOR UNIT & CLASSIFICATION OF MATERIAL 

  • CNC-controlled motorized rollers
  • Automated tilting device for stacking of finished material
  • Profiles up to 40 feet in length
  • Accommodates forking up to 5 subdivisions MITRE shearing of flat bars from – 45 to 45º

 

 

 

 

 

 

LINE PRO Software 

  • Importing of .dxf and .dstv files
  • Nesting optimizes material use

 

 

 

Compatible tooling & consumables

For more detail & product enquiry.

Related Products

Geka Alfa 500 Series

Geka-ironworker-cnc-alfa-500-2

Geka SemiPaxy

Geka-ironworker-cnc-semipaxy-2

Geka Hydracrop Series

Geka-punching-shears-two-cylinders-hidracrop-110-1