|ALMI AL150HS - Technical Specification|
|Voltages||230V 3F, 400V 3F of 460V 3F|
|Belt speed||45 m/s, 4300 rpm|
|Tire size||100×2000 mm / 150×2000 mm|
|Grinding angle||20 – 90º|
|Operation||Lever and handwheel operation|
2 IN 1 PIPE GRINDER
The new AL150HS has a belt speed of 45 m/s due to its unique transmission. When you open the rear cover, you can also use the pipe grinder as a belt sander, ideal for deburring cut profiles. The AL150HS has the option of being operated by means of two handwheels or by means of a lever. Both options are available on the machine. With the AL150HS you can grind material from Ø20 to Ø114.3. The cross support and the slide with rotatable clamp are infinitely adjustable. This allows all pipe profiles to be ground at any desired angle from 20° to 90°. The AL150HS grinds square, rectangular and round pipes with different wall thicknesses and is suitable for all common material types. It is now even easier to adjust the grinding belt with the supplied hex wrench. The grinding belt can be quickly tensioned and grinding rollers can be changed in just a few seconds.
Thanks to new developments, ALMI has been able to achieve a grinding speed of 45 m/s with the updated AL150HS. As a result, the sanding belt has a longer service life, and faster grinding results in less heat in the material, resulting in less discolouration and fine dust.
All ALMI pipe grinders are produced by professional craftsmen. All parts are provided with a protective coating, which guarantees a long service life.