BAND SAWS, TWIN PILLAR, AUTOMATIC, STEEL AND ALUMINUM CUT, STRAIGHT CUT

IMET – XSMART3

Automatic hydraulic double column saw with robust mechanical structure associated with advanced technology, the new xsmart responds for automatic high production series

CNC control for programming multiple lengths and quantities on the same bar
Feeder carriage with bridge structure and roller conveyor for material support
Material feed by the electric motor and recirculating ballscrews
Double vice for clamping the workpiece before and after the blade
Pulleys Inclination of 30 degrees allows to extend the life of the blade
Double column saw frame with sliding on linear guides recirculating ballscrews
Sliding of the mobile blade guide on linear guides and recirculating ballscrews, with automatic approach of the workpiece
Sensor for automatic detection of the start cut point
Standard vice pressure adjustment
Standard cutting pressure adjustment
Mobile console
Led light for lighting the working area
Completely covered with easy access for maintenance
Electric conveyor chips as optional
Final scrap-end 50 mm
Washing Gun
Double Clamp Bridge feeder structure with roller tables support
Cleaning motorized brush

More Information

IMET MAXI-XSMART 3

Specifications


Area angular cut	°	90
Cutting capacity at 90°: round / square / rectangular	mm.	310 / 310 / 340x310
Cutting capacity at 90°: rectangular with cutting bandle	mm.	340x250
Blade dimensions	mm.	3730 x 34 x 1.1
Inclination of the Blade	°	0
Blade Motor Power	KW	3
Run of feeder carriage (repeatable)	mm.	500
Feeder motor power	KW	0.75
Scrap end	mm.	50
Blade speed	mt/min.	15÷100
Motor Hydraulic Unit	KW	0.75
Capacity Tank of Hydraulic Unit	Lt	20
Capacity Coolant Tank	Lt	50
Dimensions ( B x L x H )	mm.	1950x1755x1965
Height of the Working-table	mm.	922
Weight	Kg	1650
Minimum cuttable length	mm.	10
Type of Functioning		semiautomatic/automatic CNC
Suitable for Cutting		Steel / cast iron / high-strength steels / alloys

Feature

SMART portal feeder carriage

Carbide guide pads

XSMART motorized blade cleaning brush

Roller tables RTS

Roller tables with freerolls, to use for loading side and unloading side, made of an electro-welded steel structure in forms of 2 meters each, with 7 galvanized steel rolls (of PVC for Velox models), the first element is with two adjustable height pedestals , the following ones with a single pedestal. They include plates of protection among the rolls to avoid crushing. The structure is completely closed to avoid dispersions of coolant.

Vertical rollers RTS

To be combined with roller RTS, if the bundle cutting device is required, it is advisable to apply these vertical rollers on the roller table to hold over the entire length of the beams material (up to 6 pairs every 2 meters in length).