GEKA Hydracrop 55 – 55-tonne hydraulic ironworker

The GEKA Hydracrop 55 is a hydraulic ironworker designed for punching, shearing and notching a wide range of steel sections. Combining five working stations with a two-cylinder hydraulic system, it allows multiple operations to be carried out on one machine.

With a 550 kN punching force and a choice of two throat depths, the Hydracrop 55 provides a practical solution for fabrication workshops working with flat bar, angle, round bar, square bar and structural sections.

Available in two configurations:

  • Hydracrop 55S: 250 mm punching throat depth.
  • Hydracrop 55SD: 500 mm punching throat depth for greater reach when working with larger sections and plate.

PPT can configure the machine with additional positioning systems and automation to suit your production requirements. We can also discuss trade-ins of existing GEKA machinery, subject to condition.

Hydracrop 55S and 55SD specifications

Compare the two Hydracrop 55 configurations below to determine which throat depth best suits your applications.

Specification 55S 55SD
Punching force 550 kN 550 kN
Punching capacity (hole diameter × thickness) Ø40 × 10 mm or Ø20 × 20 mm Ø40 × 10 mm or Ø20 × 20 mm
Throat depth 250 mm 500 mm
Punch stroke 60 mm 60 mm
Punch strokes per minute (20 mm travel) 37 37
Punching working height 1085 mm 1085 mm
Flat-bar shearing (width × thickness) 300 × 15 mm or 200 × 20 mm 300 × 15 mm or 200 × 20 mm
Flat-bar shear blade length 305 mm 305 mm
Flat-bar shear working height 880 mm 880 mm
Cut of an angle leg at 45° 60 mm 60 mm
Section-shearing force 1100 kN 1100 kN
Angle at 90° — standard blade 120 × 120 × 10 mm 120 × 120 × 10 mm
Angle at 45° — both legs 70 × 70 × 7 mm 70 × 70 × 7 mm
Angle at 90° — optional special blade 130 × 130 × 13 mm 130 × 130 × 13 mm
Round bar cutting capacity Ø40 mm Ø40 mm
Square bar cutting capacity 40 mm 40 mm
Notching — plate thickness 10 mm 10 mm
Notching — angle size 100 mm 100 mm
Notching — depth × width 90 × 42 mm 90 × 42 mm
Motor power 5 kW 5 kW
Net weight 1390 kg 1750 kg
Gross weight 1598 kg 2012 kg
Packaging dimensions (L × W × H) 1.67 × 1.16 × 2.09 m 2.10 × 1.16 × 2.09 m
Seaworthy packing volume 4.04 m³ 5.09 m³

Capacities are based on material rated at 45 kg/mm². Special blades and additional tooling are available as options. Confirm the supplied equipment, tooling and machine configuration with PPT.

Workstations and positioning systems

The Hydracrop 55 can be equipped with a range of material positioning and feeding systems to improve accuracy, consistency and production efficiency.

55-tonne Hydracrop

The Hydracrop 55 is available in two configurations, the 55S and 55SD. Both provide 550 kN of punching force, with the main difference being the available throat depth.

GEKA Hydracrop 55 two-cylinder ironworker
55 tonne

Semipaxy – CNC positioning

The Semipaxy positioning system introduces CNC-controlled material positioning, allowing programmable movement along the X and Y axes. This helps improve repeatability and accuracy when carrying out multiple punching operations.

GEKA Semipaxy CNC positioning
Semipaxy

PAX – automatic positioning

The PAX system provides automatic positioning along the X axis, allowing multiple punching operations to be carried out at programmed intervals along a material section.

GEKA PAX positioning
PAX

ALRS – automatic flat-bar feeding

The ALRS automatic flat-bar feeder is not available on the 55-tonne model.

GEKA ALRS automated flat-bar feeder
ALRS

Features and equipment

The Hydracrop 55 has five stations on one machine: punching at 550 kN with a quick-change punch, flat-bar shearing with adjustable guides, angle and section shearing, round and square bar cutting, and notching. Two hydraulic cylinders let two stations work at the same time, and both the 55S and 55SD include a reduced-pressure, slow-speed approach. Further tooling and automation can be added.

Punching, cutting and notching capabilities

The Hydracrop 55 is designed to handle a broad range of steel fabrication operations. The following diagrams illustrate some of the standard and optional tooling arrangements available for the machine.

Standard punching, round and square bar cutting, angle cutting and flat bar cutting

Punching and cutting

Standard punching operations, round and square bar cutting, 90-degree angle cutting and flat-bar shearing.

Tube notching, channel punching, punching at the end of a tube and claw equipment

Notching and section punching

Additional tooling arrangements for tube notching, channel punching, end-of-tube punching and specialised claw equipment.

U and I profile cutting, oversize punching and triangular notching

Profile cutting and notching

Further applications include U and I profile cutting, oversized punching and triangular notching.

Some operations require optional tooling or additional equipment. Confirm suitability with PPT.

Compare GEKA Hydracrop models

The GEKA Hydracrop range offers several machine capacities to suit different fabrication requirements. Compare the 55, 80 and 110 models below to identify the machine best suited to your material sizes and production needs.

For specifications marked S / SD, the first figure represents the S model and the second represents the SD model.

Specification Hydracrop 55 Hydracrop 80 Hydracrop 110
Punching force (kN) 550 800 1100
Punching capacity Ø × thickness (mm) 40 × 10 / 20 × 20 40 × 14 / 24 × 24 40 × 20 / 28 × 28
Throat depth — S / SD (mm) 250 / 500 300 / 500 300 / 610
Punch stroke (mm) 60 70 80
Punch strokes/min at 20 mm travel 37 40 28
Punching working height (mm) 1085 1095 1165
Flat bar (mm) 300 × 15 / 200 × 20 450 × 15 / 300 × 20 600 × 15 / 400 × 20
Flat-bar shear blade length (mm) 305 475 605
Flat-bar shear working height (mm) 880 850 960
Cut of angle leg at 45° (mm) 60 80 100
Section-shearing force (kN) 1100 1500 1800
Angle 90°, standard blade (mm) 120 × 120 × 10 130 × 130 × 13 152 × 152 × 13
Angle 45°, both legs (mm) 70 × 70 × 7 70 × 70 × 7 70 × 70 × 7
Angle 90°, special blade (mm) 130 × 130 × 13 152 × 152 × 13 160 × 160 × 16
Round bar diameter / square bar (mm) 40 / 40 45 / 45 50 / 50
Notching plate thickness (mm) 10 12 13
Notching angle size (mm) 100 100 100
Notching depth × width (mm) 90 × 42 90 × 52 90 × 52
Motor (kW) 5 9 9
Net weight — S / SD (kg) 1390 / 1750 2070 / 2400 2750 / 3300
Gross weight — S / SD (kg) 1598 / 2012 2323 / 2760 3162 / 3795
Packaging — S, L × W × H (m) 1.67 × 1.16 × 2.09 2.13 × 1.20 × 2.05 2.13 × 1.20 × 2.20
Packaging — SD, L × W × H (m) 2.10 × 1.16 × 2.09 2.31 × 1.20 × 2.05 2.69 × 1.40 × 2.20
Seaworthy packing volume — S / SD (m³) 4.04 / 5.09 4.72 / 6.68 5.62 / 8.28

For further information on machine configurations, tooling and optional equipment, contact the PPT team.

Brochure and enquiries

Not sure which Hydracrop configuration is right for your workshop?

The PPT team can help you select the appropriate machine, tooling and positioning equipment based on the material you work with and the operations you need to perform.

When enquiring, it helps to provide:

  • Material types and section sizes.
  • Maximum material thickness.
  • Required hole diameters and punching capacities.
  • Required throat depth.
  • Any positioning or automation requirements.

Contact PPT to discuss your requirements and arrange a machine quotation.