Compact sheet fibre laser for precision cutting

The GWEIKE LF1390 is a fully enclosed CNC fibre laser for cutting small parts and thin sheet.

  • Laser power · 500 W to 3 kW
  • Working area · 1,300 × 900 mm
  • Repeat positioning accuracy · ±0.02 mm

Where this machine suits

A good fit for small brackets, instrument panels and thin-sheet profiles when your material fits a 1,300 × 900 mm bed.

If you regularly start with full 3,000 × 1,500 mm sheets, compare the LF3015P II to avoid pre-cutting stock to fit.

LF1390 specifications

Specification LF1390
Laser power options 500 W, 800 W, 1 kW, 2 kW or 3 kW
Working area 1,300 × 900 mm
Repeat positioning accuracy ±0.02 mm
Maximum travel speed 40 m/min
Maximum acceleration 0.5 g
Drive system Precision ball-screw drive
Cutting head Autofocus
Enclosure Fully enclosed

Machine construction and components

Compact enclosed bed

Fully enclosed cutting area with a viewing window. Check that your blank fits the working area and that there is room to handle it at the machine.

GWEIKE LF1390 machine enclosure and viewing window

Autofocus and ball-screw drive

The cutting head adjusts focus through the control. The manufacturer documents dual ball-screw drives on the Y axis.

GWEIKE LF1390 dual rail and ball-screw drive

Ball-screw drive assembly

Precision ball-screw drive and automatic focus adjustment.

GWEIKE LF1390 ball-screw drive assembly

Drive and motion

Lightweight aluminium gantry and dual Y-axis drive.

GWEIKE LF1390 drive and motion components
  • GWEIKE lists 500 W, 800 W, 1 kW, 2 kW and 3 kW sources. Select power around your usual material and thickness.
  • If your work depends on DXF import or automatic nesting, ask for a demonstration using your own file and the controller quoted.
  • Confirm assist gas, extraction and site supply for the selected build.
Specification LF1390 M3 Ultra 6-in-1 LF3015P II
Working area 1,300 × 900 mm 1,380 × 920 mm 3,000 × 1,500 mm
Laser power 500 W–3 kW 1.2 kW fibre + 130 W CO₂ 1–3 kW
Table and loading Compact enclosed bed Enclosed CNC platform Pull-out bed

Cutting samples

Brochure and enquiries

Send a typical part drawing, your material and thickness range, and the largest blank you need to load.

Optional equipment and support

Ask PPT about fume extraction, site requirements, commissioning and operator training for your configuration.

Tell PPT what materials, thicknesses and parts you plan to cut. We can help with installation planning, commissioning, training and ongoing support.