LF4020GA exchange-table fibre laser
The GWEIKE LF4020GA is an enclosed CNC fibre laser for larger sheets. PPT offers a 6 kW standard configuration and a 12 kW option, with installation, operator training and ongoing support.
- Cutting area · 4,000 × 2,000 mm
- Laser power · 6 kW standard, 12 kW option
- Platform load · 1,100 kg
Where this machine suits
For larger panels, long profiles and nests that need a 4,000 × 2,000 mm sheet. The exchange table lets operators stage material at the outside pallet while cutting continues inside.
Choose between the 6 kW and 12 kW configurations using your actual material grades, thicknesses and acceptable edge finish.
LF4020GA specifications
| Specification | LF4020GA |
|---|---|
| Cutting area | 4,000 × 2,000 mm |
| Laser power | 6 kW standard, 12 kW optional |
| Z-axis travel | 340 mm |
| X/Y positioning accuracy | ±0.03 mm |
| X/Y repeat positioning accuracy | ±0.02 mm |
| Maximum X/Y travel speed | 100 m/min |
| Maximum acceleration | 1.2 G |
| Transmission | Dual-drive rack |
| Table exchange time | 15–17 s |
| Working platform load | 1,100 kg |
| Machine dimensions | 10,750 × 3,380 × 2,300 mm |
| Machine weight | 7,700 kg |
| Table type | Automatic exchange table |
| File import | DXF |
| Lubrication | Automatic oiling |
| X-axis travel | 2,000 mm |
| Y-axis travel | 4,000 mm |
Machine construction and components
- The September 2025 brochure lists DXF input. If nesting or offline programming is important, review the controller and software package on the quote.
- Automatic exchange table for loading and unloading.
- Cutting software accepts DXF files.
- Assist gas and extraction options depend on the material, thickness and edge finish.
- A welded, reinforced bed supports the guide rails beneath an aluminium gantry. The separate control cabinet houses the electrics and laser source.
- The CNC accepts DXF files. The enclosed cutting area connects to an external dust extractor.
- The PPT brochure describes high-pressure air as an option for suitable thinner galvanised, stainless and aluminium sheet. The edge finish differs from nitrogen cutting.
- PPT’s September 2025 brochure lists 6 kW as standard and 12 kW as an option.
- The brochure describes optional high-pressure air for suitable thin sheet and external dust extraction. Select gas and extraction for the job.
- If automatic sheet loading is required, assess the loader separately against sheet weight, size and the floor plan.
| Specification | LF3015GA II | LF4020GA | LF4020GH | LF6025GA |
|---|---|---|---|---|
| Working area | 3,000 × 1,500 mm | 4,000 × 2,000 mm | 4,000 × 2,000 mm | 6,000 × 2,500 mm |
| Laser power | 6 kW offer | 6 kW standard; 12 kW option | Confirm build | 6 or 8 kW |
| Table and loading | Exchange table | Exchange table | Exchange table | Exchange table |
Brochure and enquiries
Send your sheet dimensions, maximum sheet weight, material grades and workshop layout.
- Download the LF4020GA brochure (PDF)
- PPT LF4020GA floor plan (PDF)
- Watch the LF4020GA demonstration on YouTube
- Browse all sheet laser cutters
Optional equipment and support
- Compare fibre laser compressors
- Dehaha DBZY-20A optional compressor for suitable 3–6 kW installations.
- TOPSINN dust extraction
- Fibre laser consumables and spares




