LF6025GA large sheet fibre laser

The GWEIKE LF6025GA is an enclosed fibre laser for large sheets and long parts. PPT lists 6 kW and 8 kW configurations. Installation, operator training and ongoing support are available.

  • Working area · 6,000 × 2,500 mm
  • Laser power · 6 kW or 8 kW
  • Table · Exchange table

Where this machine suits

For long profiles, wide panels and full-sheet nests that exceed a 4,000 × 2,000 mm table. The 6,000 × 2,500 mm working area is useful when larger blanks let you cut a profile in one piece.

Check whether your workshop has room to bring in and unload full-length sheets at the exchange area.

LF6025GA specifications

Specification LF6025GA
Laser power 6 kW or 8 kW
Working area 6,000 × 2,500 mm
Repeat positioning accuracy ±0.02 mm
Maximum Speed 120 m/min
Max. Acceleration 1.5 G
Table type Exchange table
CNC software (October 2024 brochure build) CypCut 2000C
Fibre source (October 2024 brochure build) MAX

Machine construction and components

Exchange-table loading

The outside pallet is available for staging a sheet or removing parts while cutting takes place inside. Plan access around it for the handling equipment you use.

GWEIKE LF6025GA manufacturer render showing the outside pallet
  • PPT’s October 2024 brochure describes CypCut 2000C with DXF import and sheet nesting. Check the software package if you prepare nests at a separate workstation.
  • Exchange platform for loading and unloading large sheets.
  • CypCut control and nesting tools for DXF and other supported drawing files.
  • Enclosed cutting area with provision for external dust extraction.
  • PPT’s brochure lists 6 kW and 8 kW MAX sources for this GA configuration.
  • The documented build uses an Atlanta rack, Yaskawa motors and Neugart reducers, with CypCut control and nesting.
  • The enclosed machine uses a reinforced welded bed, an aluminium gantry and a separate control cabinet.
  • Load and unload on the second platform while the other table is in use.
  • High-pressure air can suit some thinner stainless and aluminium jobs. Ask about the finish needed for your parts.
  • PPT’s October 2024 brochure describes 6 kW and 8 kW MAX configurations.
  • Confirm table capacity, installed dimensions and site supply against the quoted machine.
  • Discuss extraction, air or assist gas and handling equipment for your 6 m sheets.
Specification LF3015GA II LF4020GA LF4020GH LF6025GA
Working area 3,000 × 1,500 mm 4,000 × 2,000 mm 4,000 × 2,000 mm 6,000 × 2,500 mm
Laser power 6 kW offer 6 kW standard; 12 kW option Confirm build 6 or 8 kW
Table and loading Exchange table Exchange table Exchange table Exchange table

Brochure and enquiries

Send your longest parts, usual sheet weights and the access available for loading and unloading.