LF3015GA II enclosed fibre laser with exchange table
The GWEIKE LF3015GA II is a fully enclosed CNC fibre laser for sheet metal fabrication. The exchange table lets you load the next sheet while cutting is underway.
North Island installation offer
6 kW GWEIKE LF3015GA II — $154,871 + GST installed in the North Island.
Send us your workplace details, the materials and sheet sizes you cut, and where you’d like the machine installed. We’ll work with you on an installation plan for your site.
- Working area · 3,000 × 1,500 mm
- Laser power · 6 kW offer
- Table · Exchange table
Ready for demo. Ask PPT to see the 6 kW machine and discuss extraction, compressed air and training for your workshop.
Where this machine suits
For shops running repeated nests on 3,000 × 1,500 mm sheets. While one pallet is in the enclosure, the operator can unload parts and stage the next sheet on the other pallet.
This is useful when loading and part removal account for a noticeable share of the time between jobs.
LF3015GA II specifications
The cutting head and software below refer to PPT’s October 2024 brochure build. Use the installation drawing and electrical schedule for the quoted 6 kW package.
| Specification | LF3015GA II |
|---|---|
| Laser source on offer | 6 kW |
| Working area | 3000 x 1500 mm |
| Repeat positioning accuracy | ±0.02 mm |
| Table type | Exchange table |
| CNC software (October 2024 brochure build) | CypCut 2000C |
| Cutting head (October 2024 brochure build) | RayTools autofocus |
Machine construction and components
- The October 2024 CypCut 2000C brochure build supports DXF import, drawing and nesting. Verify the controller and any offline nesting licence on the 6 kW quote.
- Exchange table for loading and unloading between cuts.
- Enclosed cutting area with provision for external dust extraction.
- The welded tube bed supports the guide rails, and the aluminium gantry keeps moving weight down.
- The RayTools autofocus head described in the brochure adjusts focus through the control system.
- Ask about the demonstration setup with TOPSINN extraction and high-pressure compressed air.
- 6 kW North Island installation offer as shown above. Ask for the quoted source, cutting head and controller.
- Confirm the extraction, chiller and assist gas equipment included in your quote.
- If you need automatic loading or sheet storage, provide sheet sizes, weights and production volume so the handling layout can be assessed.
- Commissioning, operator training and ongoing support are available.
| Specification | LF3015P II | LF3015GA II | LF4020GA | LF6025GA |
|---|---|---|---|---|
| Working area | 3,000 × 1,500 mm | 3,000 × 1,500 mm | 4,000 × 2,000 mm | 6,000 × 2,500 mm |
| Laser power | 1–3 kW | 6 kW offer | 6 kW standard; 12 kW option | 6 or 8 kW |
| Table and loading | Pull-out bed | Exchange table | Exchange table | Exchange table |
Brochure and enquiries
Bring a repeat nest and your typical sheet weights to the demo so we can look at the cutting and loading cycle together.
- Download the LF3015GA II brochure (PDF)
- Watch the LF3015GA II demonstration on YouTube
- BOCHU FSCUT2000C and CypCut features
- Browse all sheet laser cutters
Optional equipment and support
- Dehaha DBZY-20A optional compressor for suitable 3–6 kW installations.
- TOPSINN dust extraction
- Fibre laser consumables and spares

