Fiber Laser
G Weike LF60MA- 6METERS AUTOMATIC Tube Cutting Laser
Professional cutting laser for cutting tubes, and pipes of all possible metal materials with a maximum length of 6000 mm. The LF60MA version is equipped with an automatic clamping that is able to rotate the material with a diameter of 20 – 210 mm for tubes and 20 – 150 mm for square profiles. Similar to the CNC laser version for sheet metal cutting, this fiber laser works with the highest possible accuracy and speed and is characterized by the quality of workmanship.
- The Tube/Pipe cutting laser machine gives an opportunity for 3D cutting with a rotating chuck mechanism.
- A fully enclosed design ensures safety
- Transmission and precision: Fiber laser cutting machine is equipped with a German Atlanta rack, Japanese Yaskawa motor, and German Neugart reducer gear unit.
- Independent Control Cabinet
- The CNC system controller ensures high productivity and simple operation
More Information
Full- automatic feeding & unloading mechanism
- Automatic Feeding
Realize the intelligent material separation, feeding, and seamless docking with the fiber laser cutting machine after the whole bundles of tubes are placed in the feeding device, and ensure that only one tube is delivered to the conveying arm each time. - Automatic Unloading
The finished product is automatically dropped to the storage bin, double support-bearing auxiliary support overlong tubes. Professional three-chuck configuration, full-stroke clamping, one machine can cut open holes, cut arcs which greatly saves the cost of raw materials
Fractional Automatic Support Installation
It employs an intelligent tube support design, which can solve the deformation problems in the process of long tube cutting.
Clamp Design
It adopts a pneumatic clamp design on both sides and can modulate the center automatically. The diagonal adjustable range is 20-300mm.
Auto Focus Laser Cutting Head
-
Without Manual Focusing
The software automatically adjusts the focusing lens to realize automatic perforating and cutting plates of different thicknesses. The speed of automatically adjusting the focus lens is ten times of manual adjusting.
-
Bigger Adjustment Range
Adjustment range -10 mm~ +10mm, precision 0.01mm, suitable for 0 ~ 20mm different types of plates.
-
Long Service Life
The collimator lens and focus lens both have a water-cooling heat sink which reduces the temperature of the cutting head to improve the life of the cutting head.
Wireless Controller
It employs a wireless controller, with free control clamp pressure for easy control and operation, which can reduce pipe deformation.
Automatic Stroke Protection
Detect the whole process of cutting head working, quickly feedback the risk and stop it. Double protection with the fixed limit to improve equipment and personal safety and reduce risk
Intelligent Alarm System
It can detect anomalies in advance, reduce hidden dangers, and double the effect of abnormal detection of equipment.
| Machine Model | LF60MA |
| Laser power | 1000W 2000W 3000W 4000W 6000W (Optional) |
| Tube size | 6 mts long |
| Dimensions | 12694*5345*2638 MM |
| Machining range | Hold diameter: Φ20mm-Φ300mm |
| Repeat positioning accuracy | ±0.02mm/m |
| Maximum Acceleration | 1.5G |
| Specified voltage and frequency | 380V/50Hz/60Hz |
Professional tube fiber laser cutting machine—LF60MS is used for cutting square tube, rectangular tube, oval tube, waist type tube, hexagonal tube; square tube □ 20 * 20- □150 *150mm, round tube Φ20-Φ 210mm wall thickness of 0.5-10mm carbon steel tube, 0.5-10mm stainless steel tube.
