GWEIKE 1,200 W handheld fibre laser welder

GWEIKE 1,200 W handheld fibre laser welder

This is the handheld fibre head for the GWEIKE M Series. One 1,200 W unit welds, cuts, and cleans. The enclosed bed is chosen separately: M3 Pro or M3 Ultra.

  • Fibre source: 1,200 W
  • Weld, cut, and clean, including rust removal
  • Continuous, spot, and pulse welding
  • Wire feeder, 8 m cable, air cooling

It is a different machine from the 2 kW air-cooled handheld laser welder.

Where it sits

The head is the handheld side of the GWEIKE M Series 6-in-1. On the workstation it comes off the bed for weld, cut and clean work, and it goes back on for CNC metal cutting.

The M3 Pro bed is 620 × 620 mm with an 80 W CO₂ source. The M3 Ultra bed is 1,380 × 920 mm with a 130 W CO₂ source. This welder page is the 1,200 W fibre head only.

1,200 W handheld specifications

These figures are for the 1,200 W handheld unit.

Specification 1,200 W
Laser type Fibre
Laser power 1,200 W
Functions Welding, cutting, rust removal and cleaning
Welding mode Continuous, spot and pulse
Processing thickness 0.2–4 mm
Wavelength 1,080 ± 10 nm
Assist gas Nitrogen, argon or air
Cooling Air
Laser safety class Class 4
Operating temperature −10 °C to 40 °C
Size 620 × 355 × 610 mm
Weight 49.2 kg
Wire feeder weight 10.8 kg
Cable length 8 m

What the head is built to do

Rated to 40 °C

The cabinet is marked for work up to 40 °C. That is the published maximum operating temperature for this 1,200 W unit. Cooling is air.

GWEIKE 1,200 W fibre laser welder, operating temperature up to 40 °C

Rated from −10 °C

The same operating range starts at −10 °C. That is the published minimum for the handheld unit.

GWEIKE 1,200 W fibre laser welder, operating temperature from −10 °C

Handheld welding

The head welds in continuous, spot, and pulse modes. A wire feeder is part of the listing, and the cable is 8 m, so the work does not have to sit on the enclosed bed.

Handheld fibre laser welding with the GWEIKE 1,200 W head

Cleaning and rust removal

The same 1,200 W head cleans and removes rust. Assist gas for the handheld unit is nitrogen, argon, or air.

Handheld laser cleaning and rust removal with the GWEIKE 1,200 W head

Handheld cutting

The head also cuts metal away from the bed. Published processing thickness for this handheld unit is 0.2–4 mm.

Handheld fibre laser cutting with the GWEIKE 1,200 W head

Features and equipment

The 1,200 W head welds, cuts, and cleans away from the enclosed bed. Continuous, spot, and pulse welding are on the same unit, and a wire feeder is part of the listing. The 8 m cable reaches work that does not fit on the bench. Cooling is air, and the handheld unit is Class 4. It pairs with the M3 Pro or the M3 Ultra. It is not the 2 kW air-cooled welder. Commissioning, operator training and ongoing support are available from PPT.

Brochure and enquiries

Tell PPT the materials and thicknesses you want to weld, and whether the head is going with an M3 Pro or an M3 Ultra.