G Weike LF60MS- 6METERS ‘ THREE CHUCK ZERO REMAINS’
Available with optional ‘5-axis head’
Professional cutting laser for cutting tubes, and pipes of all possible metal materials with a maximum length of 6000 mm. The LF60MS version is equipped with an automatic clamping that is able to rotate the material with a diameter of 20 – 210 mm for tubes and 20 – 150 mm for square profiles. Similar to the CNC laser version for sheet metal cutting, this fiber laser works with the highest possible accuracy and speed and is characterized by the quality of workmanship.
- The Tube/Pipe cutting laser machine gives an opportunity for 3D cutting with a rotating chuck mechanism.
- A fully enclosed design ensures safety
- Transmission and precision: Fiber laser cutting machine is equipped with a German Atlanta rack, Japanese Yaskawa motor, and German Neugart reducer gear unit.
- Independent Control Cabinet
- The CNC system controller ensures high productivity and simple operation
G Weike LF60MS
G Weike LF60MS
“ZERO” Tail material
Professional three-chuck configuration, full-stroke clamping, one machine can cut open holes, cut arcs which greatly saves the cost of raw materials
Full- automatic feeding & unloading
- Automatic FeedingRealize the intelligent material separation, feeding and seamless docking with the fiber laser cutting machine after the whole bundles of tubes are placed in the feeding device, and ensure that only one tube is delivered to the conveying arm each time.
- Automatic UnloadingThe finished product is automatically dropped to the storage bin, double support-bearing auxiliary support overlong tubes.
Fractional Automatic Support Installation
It employs an intelligent tube support design, which can solve the deformation problems in the process of long tube cutting.
It adopts a pneumatic clamp design on both sides and can modulate the center automatically. The diagonal adjustable range is 20-300mm.
Easy to Operate
It employs a wireless controller, with free control clamp pressure for easy control and operation, which can reduce pipe deformation.
Raytools BM111 series
- BM111 series are autofocusing cutting head, which is released by Switzerland RAYTOOLS AG
- The product has a built-in motor drive unit through the linear driver and the focusing lens can automatically change the position in the range of 22mm.
- The user can set the focus continuously through the program to complete the rapid per piercing of thick sheets or other different thicknesses and materials.
- The product can be equipped with D30 lens group to integrate the light beam.
- The optimization of optical design and the design of water-cooled allows laser heads stably and chronically to work at high power lasers.
Professional tube fiber laser cutting machine—LF60MS is used for cutting square tube, rectangular tube, oval tube, waist type tube, hexagonal tube; square tube □ 20 * 20- □150 *150mm, round tube Φ20-Φ 210mm wall thickness of 0.5-10mm carbon steel tube, 0.5-10mm stainless steel tube.